More fun with dyneema

Some may recall an earlier rigging tips post where I shared a video which explained how to put eye splices in 12 strand dyneema line.  Yesterday I watched another video, posted on Scuttlebutt, which reveals how to make "soft shackles" out of the same type of line.  If you missed it here it is:

2016 Classic Moth Boat Mid-Winter Regatta

The weekend of the 20th/21st of February was our annual slog down I-95 to Florida for the Mid-Winter regatta at Gulfport, Florida.  I think we've been racing  out of Gulfport YC now for at least ten years.  Before that we raced a couple of times from the Davis Island YC, and during the first few years the event then billed as "the meet in St. Pete" was sailed from  the St. Pete YC's small boat sailing center.   This year's weather was warm and inviting (temps in low 70s and sunny) all three days.  Winds were a bit on the soft side at times but for an old geezer easing back into a boat after a long layoff that was probably a blessing.

My regatta started off on the wrong foot when a few yards off the beach the halyard some how jumped out of the lock at the tip of the mast.  Being lazy, and with loads of time to spare, I allowed the wind to blow me back to the shore for a proper hoist rather than flipping the boat, swimming to the mast head and faffing about with the sail and halyard while trying to keep my nose above water.

Things did get better after that.

We had a decent NE breeze of about 10 knots for the first two races in which I did OK.

Then the wind started to drop and my brain went on holiday.  Around noon the sea breeze from the Gulf started to compete with the morning breeze and at that point the wind dropped to zero.  We bobbed up and down for the better part of an hour waiting for the sea breeze to fill in.

Eventually the sea breeze dominated, the Race Committee switched the race course 180 degrees (wind was now from the SW), and racing resumed.

Woody Kapp sailing his McCutcheon-built Shelley Mk I.  I have a fondness for racing pix which feature sparkling waters and palm trees in the background.

Tom Kapp, sailing a Europe gives his twin sibling a bit of shade.  Very thoughtful.

Lewis Hay came down from Charleston with eight others from that Classic Moth fleet.  Several of the Charleston sailors where sporting new sails designed by Ethan Bixby.  Some of the new sails were loose footed while others retained the bolt rope foot.  The jury is still out as to the merits of the loose foot design for a Classic Moth.  One obvious point is that without the support of the bolt rope in the foot, one needs to use a beefy boom if one's traveler is set up for center sheeting.  The stock Europe dinghy boom seems strong enough.

Another look at Lewis' sail.  In this shot the loose foot hasn't slipped over to the leeward side of the boom.

Jack Clark came over from Melbourne Beach, Florida with a round bilge Paul Lindenberg-designed Moth which was very similar to the Europe design in both looks and performance.  The boat was built using mahogany veneers and is almost too pretty to use.  One can see that his sail uses lacing to attach it to the boom and that the boom in this case has an aft traveler bridle to spread the load along the length of the light carbon boom.  Jack is hoping that a few Moths will come to Melbourne YC's annual spring regatta in mid-April.  If so it will be the first time in perhaps forty years that we've had a Moth regatta on both Florida coasts during the same year.  Four boats will get a separate start and save Jack from having to race Portsmouth style.

One can better see the loose footed Bixby sail in this photo of Rutledge Young's boat.  Rutledge sailed a better series than I did and at the end of the regatta bumped me off the podium by one point.  This broke my heart in that the prizes this year were big bottles of rum!

Jeff Linton was back sailing Mousetrap for the first time in several years.  He took top honors in the Gen II division.  Ethan Bixby was second in Gen II using a borrowed Mousetrap design Moth.

Mark Saunders' Mistral was third in Generation II.  Mark had a Bixby sail but opted to retain the bolt rope foot.

I was just off camera at this mark rounding gaggle of Gen I boats.

Frickie Martschink from Charleston borrowed this Europe and was top dog in Gen I.

The two Moustrap-design Moths.  Jeff L. is in Nr 102; Ethan Bixby is in Nr 103.

The winnings, sigh.

Mark receives his prize from Amy Linton.

As does Ethan.

Mr. Linton gets preferential treatment from the podium girl.

Rutledge, beer in one hand is about to receive "my" bottle of rum.  Rutledge--you dirty dog!  Congratulations!

Lewis taking the 2nd place award in the Gen I fleet.

Frickie took 1st in Gen I.  I do hope the Charleston gang made it safely home with all that hooch!  They had a clean sweep in my division.

A tip of the hat to my Photographer, IoW Len.  So, that's a wrap on this year's Mid-Winters.  If you have a Moth and didn't come race then shame on you--you missed a great event.

New Year, Two New Moth Boat blogspots to follow

The black lines on the white paper are the stock Mistral II half sections.  The lines in red on the Mylar overlay are the deviations for the modified design.

Hot on the heels of Martin Scott and John Z., Jamey Rabbitt, this past year's CMBA National Champion, has started building his new Moth.  Jamey's boat uses the Mistral plans as inspiration but isn't completely bound by them.  Will his derivation be faster than the stock boat?  Stay tuned.  His Blackberry Boatworks blogspot can be found here.

Station molds for Bill's hot rod Euro.

And of course, since it's winter, Bill Boyle can't resist building yet another new boat.  This time Bill will be constructing a Classic Moth using the Europe dinghy as his starting point.  He hopes to capture the classic Alois Roland hull shape in a strip plank version that is closer to the CMBA minimum hull weight of 75 lbs than the Europe Dinghy Union's 99 lb minimum.  So far Bill has a new jig built and has cut out the required station molds for the hull.  You can follow his progress here.

The finish line

Today I received this photo of Martin Scott's Mistral Evolution.  It's nice to see one of the two Mistrals which I've been posting about actually make it to the water!  John Z: are you listening?!

Martin Scott and Evolution.  Martin not only built the boat but designed the sail as well.  Although the sail is a bit smaller than that permitted by the IMCA it still measures in as legal. Note the full length battens are confined to the top of the sail.  Well done Martin!

Penguin 7072. One last backward glance.

Back in the fall Bill Walton flew up from Texas, rented a U-Haul van and picked up a Penguin class dinghy which I'd owned for the better part of forty years.  This wasn't just any Penguin dinghy but one of six which his father build in 1963 and the only known survivor of that cluster of boats.

Actually, my involvement with this boat began during the winter of 1963 when I helped Bill's father John while he built these boats.  During the winter of 1962/63 a bunch of island kids, including your diarist, would hang out in John's shop.  He'd put us to work doing small tasks while the boats were under construction.  One of my jobs was to take a stick of wood with sandpaper glued on and ream the squeezed out glue slag from the interior of the centerboard trunks until the pivoting centerboard worked smoothly.  I got five out of the six trunks satisfactorily sanded but try as I might, I just couldn't quite get the trunk of the orange boat to work properly.  School and other activities interrupted my time at the boathouse and somehow communicating the status of the orange boat's trunk slipped through the cracks.  In spring, the boats were picked up by their respective buyers.  I think only one or two found owners at Brigantine YC.

Later that summer I attended a multi-class regatta in my Moth down at Corinthian YC in Cape May.  The club, as was normal practice in those days, used a rolling start which initially separated the various classes by five minutes; i.e. the first class's starting signal was the 5 minute warning for the second class and that in turn was the 10 minute warning for the third class and so on.  Moths and Penguins were at the tail end of the start sequence pecking order and so I had a bit of time on my hands.  I noticed an orange Penguin not far away and I sailed over, hailed them and said "That's a Walton Penguin!"  The boat's crew, her husband and wife owners, confirmed that indeed it was and asked how I knew.  I said "I worked on those boats while they were being built."  They asked what part of the boat I'd worked on and I replied "The centerboard trunk."  The wife looked at me stonily across the intervening water and said "That's the part that doesn't work!"  I quickly sailed away...

Twelve years later, being both boat-less and recently discharged from the Coast Guard (oh, and without much money) I decided to drive down the  coast from Brigantine, revisiting the various clubs where I used to race to see if there were any boats for sale within my slim price range.  After stopping at various clubs without success, I found myself at Corinthian YC.  At the very end of the boat storage yard, right at the edge of the water was an Orange Penguin with a white bottom.  She was resting upside down but I knew at once that this was that boat.  Sure enough, after flipping her over I saw John Walton's builder's tag.

I happened to know the girl working the club bar (we both were students at the University of Delaware) and so I asked her to see if she could learn which club member owned that boat.  The owner turned out to be a lawyer from Philadelphia who proved only too pleased to untangle himself from the seldom used Penguin.  The boom had been trapped under the hull but the wooden mast had floated off, probably with the first high tide.  Luckily, he had the rudder, sail and other small gear for the boat in a storage locker.  The hull was sound except for the rub rails which had been in direct contact with the damp sand.  I offered him a hundred dollars and he quickly accepted.  I borrowed a trailer and brought the boat back to her birthplace.  I had a local boatyard replace the rotted rub rails but I reserved the task of sorting out the centerboard trunk to myself.  Providence had given me a second chance to  right this wrong and I did.  When finished, the blade pivoted effortlessly.  I repainted the little boat white and sanded and revarnished her interior.  Jack Wright, a well known Penguin builder in Germantown, PA supplied a used mast for $25 dollars.  After putting the hardware back on, I sailed the Penguin for several years before getting hip deep with Moth Boats again.  Once I started racing Moths, the Penguin sat in the garage.  From time to time I'd look at the boat and tell myself I should pull her out and sail her again, but I never got around to doing that.

I needed to clear out my garage and decided that I didn't want this bit of Brigantine history to just disappear so I spoke with other long standing members of the BYC until I learned Bill's contact information.  I emailed Bill and offered him the boat for a very small price.  He immediately emailed back saying that he wanted the boat as a tangible connection for his son to his paternal grandfather and to the island.

Over the years I've bought and sold many boats.  I've yet to regret the selling of a plastic boat.  The boats I do miss have all been wood.  Why is there a slob sentimentality connection between me and wood boats?  Why can I sell off a glass boat with flinty-eyed resolve?  Perhaps it's due to woodies being constructed from once living things. Or perhaps the act of selling a particular bit of wood marks the severance from people and places that where once a large part of an early and formative era of my existence.  I don't know, but the tug is genuine. 

Brigantine, spring of 1963.  Penguin hulls and spars resting outside the Walton family boathouse. One of my boyhood pals, Paul Rosell, lived in the grey house (with the skinny white tv tower) directly across the alley from the Walton's.

The orange hull with the dark boot stripe and white bottom is Nr 7072.  John Walton's Lightning Starlight, Nr 1726 can be seen in the background. These two period photos are courtesy of Bill Walton.  Moths, Penguins and Lightnings comprised the three classes which were raced at BYC in those days.

The sailmaker's patch on the original sail for the boat.

Outdoors, waiting for pickup.  Of course it rained.  First time wet in many years!

Hull number carved into the keel.

John Walton's builder tag on the inside of the transom.

Basically sound.  Just needs a lick of varnish and new exterior paint.

The eleven foot 6 inch hull just fit inside the twelve foot van.  John took the boat to Chestertown, MD for storage in a friend's shop until he can return in the spring for the long ride back to Texas where he lives.  I'm storing the mast and other small bits to save him a little on the storage space until then.  Bill Walton is seen here wearing the green jacket.  Tweezerman, closer to the camera, graciously came over to help with the lifting since I was, at that point, still recovering from a TBI which resulted in me having to have a craniotomy.

I hate to see her go but returning her to the builder's family is good and happy ending to my Penguin ownership.  I know she'll be well looked after.  Smooth Sailing, John!

Miss Fortune

A while ago, Roland Hunn sent me the photo below of his parents, Ethel (Toby) Hunn and Knute Hunn standing next to Toby's Moth, Miss Fortune, Nr 500.  The venue is the Riverton Yacht Club which is located on the New Jersey side of the Delaware River, across from Philadelphia.  The date is some time in the immediate post WW II era.  Although the specific design and builder of the Moth are unknown, the sail number suggests that Miss Fortune was most likely built in 1938 or 1939.  Mrs. Hunn enthusiastically raced the boat with perhaps her best result being the third place she achieved in the women's division at the 1946 Nationals down at Elizabeth City, NC behind Peggy Kammerman (Evening Star YC) and Ruth Nickerson (Pasquotank River YC).

Knute Hunn reminds us that most Moth Boating problems can be resolved with the aid of a willing assistant, a couple bottles of beer, a good selection of hand saws and a big hammer.

Riverton is interesting in as much as it was a hot bed of dinghy racing activity, spurred by the presence of the Lippincott Boat Works. During the forty years spanning 1946 to 1986, Robert and Howard Lippincott built a number of class boats including Lightnings, Comets, Stars, and Dusters.   Howard's obituary, which briefly details the family business and involvement in one-design racing can be read here.  

I attended just one regatta for Moths and Comets in the early 1960s at RYC and in the end didn't race.  Here's why:  My father and I arrived early on the Saturday morning, for Riverton YC's annual two day invitational regatta, in order to register and put my boat together.  As it turned out registration had not yet opened so I wandered down to the docks in order to scope out the intended race area.  When I got to the pier I noticed that the water was fouled with heavy "Bunker C" fuel oil from one side of the river to the other.  I asked an elderly man what was up with that and he said "Boy, look across the river. Do you see the shipyard over on the Philly side?"  I nodded that I did.  He continued, "They salvage old Liberty ships for scrap over there and yesterday they cut one below the waterline."  I looked again at the river and said "I'm not going to put my boat into that mess."  A man using the chain hoist to launch his brand new fiberglass Comet overheard me and said "I need a crew.  Since you're not racing your Moth how about crewing for me?"  He then launched the Comet, and since it was light air, pushed off for a solo sail.  When he was several hundred feet away from the pier I heard him exclaim "I think my boat is dissolving!"   I looked at my Dad and said "Let's get out of here."  In all my years of racing small boats I've never been back to Riverton. 

Now this was years before environmental concerns where large in the public's mind and I'm sure the river is much cleaner now than then, but thinking back to that day I now appreciate why my father was fond of declaring that politicians should be tied up in bunches of three and thrown into the Delaware!

2015 Classic Moth Nationals

Although the CMBA Nats were held way back in mid September, I'm just now getting the gumption to post a few of the better ones.  Due to my head injury I was a spectator this year.

Mike Parsons scopes out the wind before the first warning on Saturday.

Gary Gowans leads Ed Salva out from the dock.

14 year old Jake Keggans borrowed Susan Bousquet's Shelley for his inaugural Moth event.  A solid choice!  This boat competed at the Moth Worlds in '65.

Carol Terryberry borrowed Arch Farmer's vintage Dorr Willey Moth.

A closer view of the vintage division boat Tennis Bracelet.  Gary rehabbed this boat over the winter.  He said he removed about a zillion brass screws (the only source of apparent stiction in this 65+ year old boat).  Gary relocated the centerboard trunk and mast step, turning a boat that previously rarely finished a race into a division winner.

Jamey Rabbitt once again borrowed Jeff Linton's Mousetrap.  But what's that bumper sticker on the transom?

Ed Salva enjoying Legend, Greg Duncan's Connecticut.

Joe Bousquet (Nr 48) mentors junior sailor Jake K before the start of one of the early heats.

Our other junior sailor, 17 year old  Zach Balluzzo.  Zach rehabbed this freebie Mistral hull and transferred the rig and hardware from last year's boat.

Don Janeway's Ventnor.  This boat has been in his family for two generations.

"South of the Border".  Those unfamiliar with this "oasis" just off I-95 at the north/south Carolina border can educate themselves here

Walt Collins flew up from Florida and borrowed a Dorr Willey from Greg and a sail from me.

Another look at Tennis Bracelet.

Zach Attack!

Both juniors were quite competitive!

Fighting for a clean lane, Carol T. comes to grips with the Dorr Willey's wishbone tiller.

Joe Bousquet's Mistral Try-Umph at rest.

Flip flop paint jobs Connecticut vs Dorr Willey.

The mighty Mousetrap is still the boat to beat in Generation II.

The Ventnor pounds a bit.

The large green roofed building in the background is the Museum of the Albemarle's new-ish home on Water Street.  The building dominates downtown Elizabeth City.

Joe Courter (Nr 40) lasted one race before gear breakage side lined his Europe.

Greg Duncan, so far, is the only one to experiment with full battens and a loose footed sail permitted after a recent rules change.  Opinions are divided about it's effectiveness.

Taking a break in between races.

John Pugh's Europe

Nr 105 is Tweezerman's Maser (Moth created from a dead Laser hull).  Some argue that Rod retained the least desirable parts!  The boat does go however.

This boat, BBB jr was once owned by champion racer Jane Bateman.  Her father owned a construction company and the family also owned a larger Comet class sloop named  BBB which stood for "Bricks By Bateman".  Mr. Bateman prided himself as a shrewd building material estimator.  Back in the late 1940s Dorr Willey was getting ready to build a new shop and so he asked Bateman to estimate the number of cinder blocks required.  Bateman did so at the conclusion of a fall regatta.  The two men, one living in Philadelphia, the other in Elizabeth City, didn't see each other until the following spring when racing resumed.  Mr. Bateman asked Dorr how he'd made out with the building project and Dorr looked up at him and said "not too good".  Bateman, taken aback, said "what do you mean?"  Dorr replied "I had two block left over."

Pedro says "that's all folks!"  Hopefully I'll be fit enough to race by the time the Mid-Winter regatta rolls around in February.